Exploring the Cost of a Trip between Canton, Ohio and Tampa, Florida: Analyzing Different Routes and Fuel Prices

Are you planning a trip from Canton, Ohio to Tampa, Florida? One of the most crucial factors to consider is the cost of the journey. Gas prices can fluctuate significantly, affecting your travel budget for the trip. In this article, we’ll examine several routes from Canton, Ohio to Tampa, Florida and calculate the cost of fuel for each of them, and finally, we'll recommend the best route.

Route 1: Via I-75S

The first route we’ll look at passes through I-75S, which is the most direct route. The distance from Canton, Ohio to Tampa, Florida, is approximately 1,093 miles, and it should take around 17 hours of driving time to reach Tampa.

The average price of gas along this route, as of October 2021, is $3.29 per gallon. Assuming a car with a 20-gallon capacity and fuel efficiency of 25 miles per gallon, you will need to buy 44 gallons of gas for the trip.

The total cost of fuel on this route would, therefore, be $144.76.

Route 2: Via I-77S and I-26E

The second route is slightly longer than the first one but offers a scenic drive, which can be an excellent experience for those who enjoy a road trip. This route passes through I-77S and I-26E, and it is approximately 1,155 miles long.

The average price of gas on this route, as of October 2021, is $3.28 per gallon. A car with 20-gallon capacity and fuel efficiency of 25 miles per gallon would require 46.2 gallons of gas to complete the trip.

The total cost of fuel on this route would, therefore, be $151.30.

Route 3: Via I-71S and I-75S

The third route on our list is via I-71S and I-75S. While it is slightly longer than the most direct route, it offers a chance to stop and visit places such as Cincinnati and Dayton. This route is roughly 1,172 miles long.

The average price of gas on this route, as of October 2021, is $3.30 per gallon. A car with 20-gallon capacity and fuel efficiency of 25 miles per gallon would require 46.88 gallons of gas for the trip.

The total cost of fuel on this route would, therefore, be $154.86.

Route 4: Via I-80W and I-75S

The final route we’ll evaluate passes through I-80W and I-75S. This route is the longest, but it presents a chance to see places such as Chicago and Indianapolis. In total, this route is roughly 1,471 miles long, and it should take around 23 hours to drive.

The average price of gas on this route, as of October 2021, is $3.35 per gallon. A car with 20-gallon capacity and fuel efficiency of 25 miles per gallon would require 58.84 gallons of gas for the trip.

The total cost of fuel on this route would, therefore, be $196.98.

Best Route

Based on the analysis of the four routes, taking into consideration distance and the cost of gas, the best route to go from Canton to Tampa is the first one, which is via I-75S. This route is the most direct, thus reducing the amount of driving time and cost of fuel.

Conclusion

The cost of gas, along with distance, should be on your mind when planning a road trip from Canton, Ohio to Tampa, Florida. While the four routes we examined would each offer a unique experience, I-75S stands out as the most fuel-efficient and direct. The fuel cost for the 1,093-mile journey is roughly $144.76, which is relatively affordable compared to the other three routes we scrutinized. Nevertheless, you should be cautious when over-relying on fuel cost estimations because gas prices typically fluctuate.