The Cost of Driving From Burlington to Berkley Based on Current Gas Prices
Are you planning a road trip from Burlington, Massachusetts to Berkley, Massachusetts? Before you hit the road, it's important to consider the cost of your journey. In this blog post, we'll break down the various routes you can take, the distance of each route, the time it takes, and most importantly, the cost involved. So buckle up and let's explore the numbers!
Route 1: Taking I-95 South
If you choose to take the most direct route, driving on I-95 South is your best bet. This route covers a distance of 81.6 miles between Burlington and Berkley. With light to moderate traffic, you can expect to reach your destination in approximately 1 hour and 20 minutes.
To calculate the cost, we'll consider the gas prices as of today. Assuming an average gas mileage of 28 miles per gallon and a gas price of $2.50 per gallon, you will need about 2.92 gallons of gas for this route. Therefore, the total cost for gas alone would be approximately $7.30.
However, don't forget about tolls! On this route, you'll encounter two toll booths. The first toll is at the Ted Williams Tunnel, costing $5.50, and the second toll is at the Fall River Expressway, costing an additional $3.50. So make sure to factor in a total of $9.00 for toll expenses.
Adding the gas cost and toll expenses together, the total cost for this route would be around $16.30.
Route 2: Taking Route 24 South
If you prefer a more scenic route, you can opt for driving on Route 24 South. This route covers a longer distance of 95.3 miles between Burlington and Berkley. Due to some congested areas on this road, the travel time will be slightly longer, taking approximately 1 hour and 40 minutes.
Given the same gas mileage and gas price as mentioned earlier, you will need about 3.4 gallons of gas for this route. So the cost for gas alone would be around $8.50.
As for tolls, you'll encounter three toll booths on this route. The first toll is at the Massachusetts Turnpike, costing $1.00. The second toll is at the Newport Bridge, costing $4.00, and the last toll is at the Grove Street bridge, costing $3.00. So, you should budget approximately $8.00 for toll expenses.
Adding the gas cost and toll expenses together, the total cost for this route would be approximately $16.50.
Route 3: Taking I-495 South
Lastly, you can choose to drive on I-495 South. This option covers a distance of 91.7 miles between Burlington and Berkley. With moderate traffic, you can expect to reach your destination in around 1 hour and 30 minutes.
Using the same gas mileage and prices mentioned earlier, you will need about 3.28 gallons of gas for this route. Therefore, the cost for gas alone would be approximately $8.20.
On this route, you'll encounter two toll booths. The first toll is at the New Hampshire Turnpike, costing $1.50, and the second toll is at the Bourne Bridge, costing an additional $2.50. So, in total, you should budget about $4.00 for toll expenses.
Adding the gas cost and toll expenses together, the total cost for this route would be around $12.20.
Conclusion
To summarize, here are the cost estimates for each route based on current gas prices and toll expenses:
- Route 1: I-95 South - Distance: 81.6 miles, Time: 1 hour and 20 minutes, Cost: $16.30
- Route 2: Route 24 South - Distance: 95.3 miles, Time: 1 hour and 40 minutes, Cost: $16.50
- Route 3: I-495 South - Distance: 91.7 miles, Time: 1 hour and 30 minutes, Cost: $12.20
Remember that these estimates are subject to change based on fluctuating gas prices and toll rates. It's always a good idea to double-check before your journey. Safe travels and enjoy your trip from Burlington to Berkley!