meetways logo
  • Home
  • About Us
  • Meet Business
  • Mobile
  • Contact Us

Driving Cost from Byron Center, Michigan to Beaver Falls, Pennsylvania

  • Halfway Point
  • Points of Interest
  • Travel Time
  • Travel Cost
A picture depicting a gas pump

The Cost of a Trip between Byron Center, Michigan and Beaver Falls, Pennsylvania

If you are considering a road trip between Byron Center, Michigan and Beaver Falls, Pennsylvania, it is important to know how much it may cost you. The cost will depend on several factors, such as the type of vehicle you will use, the route you will take, and the current gas prices. Keep reading to discover all the details and make a more informed decision.

The Different Possible Routes

Before calculating the cost of your trip, you need to decide which route you will take. There are several routes between Byron Center, Michigan and Beaver Falls, Pennsylvania, but the most common and straightforward ones are the following:

Route 1: via I-80 E and I-76 E (880 miles)

This route is the shortest one, covering 880 miles in approximately 13-14 hours, depending on traffic and breaks. The route starts in Byron Center, Michigan, and goes through Indiana, Ohio, and Pennsylvania until you reach Beaver Falls. To take this route, you need to follow the following directions:

  1. Head south on 84th St SW toward Byron Depot Dr SW
  2. Turn left at the 1st cross street onto Byron Depot Dr SW
  3. Turn right onto Byron Center Ave SW
  4. Use the left 2 lanes to turn left onto M-6 E
  5. Merge onto I-196 E
  6. Merge onto I-96 E
  7. Take exit 77A to merge onto I-69 S toward Ft Wayne
  8. Take exit 34A to merge onto I-469 E toward airport
  9. Take exit 21 to merge onto I-80 E toward Toledo
  10. Take exit 218A to merge onto I-76 E toward Pittsburgh
  11. Take exit 13 for PA-18 toward Homewood-Beaver Falls
  12. Turn right onto PA-18 S/Constitution Blvd
  13. Continue to follow PA-18 S
  14. Turn left onto 37th St
  15. Turn right onto 9th Ave
  16. Turn left onto 6th St

Route 2: via I-94 E, I-69 S, and I-76 E (921 miles)

This route is slightly longer than the previous one, covering 921 miles in approximately 14-15 hours. The route starts in Byron Center, Michigan, and goes through Indiana, Ohio, and Pennsylvania until you reach Beaver Falls. To take this route, you need to follow the following directions:

  1. Head south on 84th St SW toward Byron Depot Dr SW
  2. Turn left at the 1st cross street onto Byron Depot Dr SW
  3. Turn right onto Byron Center Ave SW
  4. Use the left 2 lanes to turn left onto M-6 E
  5. Merge onto I-196 E
  6. Take exit 34B to merge onto I-94 E toward Detroit
  7. Keep left at the fork to stay on I-94 E
  8. Keep left to stay on I-69 S
  9. Take exit 133B to merge onto I-475 S toward Maumee
  10. Merge onto I-75 S
  11. Take exit 120A to merge onto I-475 E toward Airport
  12. Merge onto I-80 E
  13. Take exit 218A to merge onto I-76 E toward Pittsburgh
  14. Take exit 13 for PA-18 toward Homewood-Beaver Falls
  15. Turn right onto PA-18 S/Constitution Blvd
  16. Continue to follow PA-18 S
  17. Turn left onto 37th St
  18. Turn right onto 9th Ave
  19. Turn left onto 6th St

Route 3: via I-94 E, I-90 E, and I-79 S (988 miles)

This route is the longest one, covering 988 miles in approximately 15-16 hours. The route starts in Byron Center, Michigan, and goes through Indiana, Ohio, New York, and Pennsylvania until you reach Beaver Falls. To take this route, you need to follow the following directions:

  1. Head south on 84th St SW toward Byron Depot Dr SW
  2. Turn left at the 1st cross street onto Byron Depot Dr SW
  3. Turn right onto Byron Center Ave SW
  4. Use the left 2 lanes to turn left onto M-6 E
  5. Merge onto I-196 E
  6. Take exit 34B to merge onto I-94 E toward Detroit
  7. Keep left at the fork to stay on I-94 E
  8. Keep left to stay on I-69 S
  9. Take exit 141A to merge onto I-69 BUS S/M-60 E toward Quincy/Coldwater
  10. Turn left onto US-12 E/M-60 E
  11. Continue to follow US-12 E
  12. Turn right onto Division St
  13. Turn left onto W Chicago St
  14. Turn right onto S Warren Ave
  15. Turn right onto E State Rd
  16. Merge onto I-90 E via the ramp to Cleveland
  17. Take exit 24 for I-79 S toward Pittsburgh (Partial toll road)
  18. Keep left at the fork, follow signs for I-79 S/Pittsburgh and merge onto I-79 S (Toll road)
  19. Take exit 29 for PA-108 toward Slippery Rock/New Castle
  20. Turn left onto PA-108 E
  21. Turn right onto Mt Jackson Rd
  22. Continue onto 37th St
  23. Turn left onto 7th Ave
  24. Turn right onto 11th St
  25. Turn left onto 6th St

The Cost of the Trip

Now that you know the different routes, it's time to calculate the cost of your trip. The main factor that will affect your cost is gas prices, which vary depending on the region and the time of the year. As of August 2021, the average gas price in Michigan is $2.92 per gallon, while in Pennsylvania, it is $3.19 per gallon.

To calculate the cost of your trip, you need to know the fuel efficiency of your vehicle and the distance of the route. As an example, let's assume that you have a 2015 Toyota Camry, which has an average fuel efficiency of 28 miles per gallon.

Route 1: via I-80 E and I-76 E (880 miles)

If you take Route 1, the total distance of your trip will be 880 miles. To calculate the cost of gas, you need to divide the distance by your car's fuel efficiency and multiply it by the gas price. For this route, you will need approximately 31.4 gallons of gas, which will cost you around $97.68.

Route 2: via I-94 E, I-69 S, and I-76 E (921 miles)

If you take Route 2, the total distance of your trip will be 921 miles. To calculate the cost of gas, you need to divide the distance by your car's fuel efficiency and multiply it by the gas price. For this route, you will need approximately 32.9 gallons of gas, which will cost you around $105.03.

Route 3: via I-94 E, I-90 E, and I-79 S (988 miles)

If you take Route 3, the total distance of your trip will be 988 miles. To calculate the cost of gas, you need to divide the distance by your car's fuel efficiency and multiply it by the gas price. For this route, you will need approximately 35.3 gallons of gas, which will cost you around $112.69.

The Best Route

After analyzing the cost and distance of each route, we recommend taking Route 1 via I-80 E and I-76 E. This route is the shortest and most direct one, saving you time and money. Moreover, you will avoid toll roads, which can increase your cost significantly, especially if you take Route 3.

Conclusion

In conclusion, the cost of a trip between Byron Center, Michigan, and Beaver Falls, Pennsylvania, depends on several factors, such as the type of vehicle you will use, the route you will take, and the current gas prices. We recommend taking Route 1 via I-80 E and I-76 E, which is the shortest and most direct route. To make a more accurate calculation of your cost, you can use online gas calculators that take into account the exact fuel efficiency of your car and the gas prices in your area. Once you know the cost, you can plan your budget accordingly and enjoy your road trip without worrying about unexpected expenses.

54,928,914 Halfway points found so far

;

Making finding a middle point between two address easier than ever.

  • About Us
  • List of Countries
  • Our Team
  • Press
  • Meet Business
  • MeetWays Mobile
  • Contact Us
  • Frequently Asked Questions
  • Meeting Points
  • Popular Searches
  • Site Map
  • Privacy Policy
  • Terms of Service

meetways.com © 2008 - 2025 Arandola, LLC