Driving Cost from Canton, Massachusetts to Barnstable, Massachusetts

A picture depicting a gas pump

The Cost of a Trip between Canton and Barnstable Based on Current Gas Prices

Traveling from Canton, Massachusetts to Barnstable, Massachusetts can be an exciting and fulfilling experience, but it can also be quite costly. The cost of a trip depends on a variety of factors, including mode of transportation, fuel prices, and distance.

Possible Routes and Costs

There are several ways to travel between Canton and Barnstable, each with its own cost and distance. Below are three common routes, highlighting the cost and distance of each one.

Route 1: Via MA-3S and US-6E

This route goes via MA-3S and US-6E, taking approximately 65.1 miles. This route is the quickest, and it takes about 1 hour and 20 minutes without traffic. However, it should be noted that this route may not be the best option during peak hours or weekends with high tourist traffic. The fuel costs based on current average gas prices from Canton to Barnstable are as follows:

  • Total Distance: 65.1 mi
  • Fuel Cost: $7.17
  • Toll Cost: $4.65 (one-way)
  • Total Cost: $11.82

Route 2: Via I-95S and MA-24S

This route goes via I-95S and MA-24S, taking approximately 70.8 miles. This is the longest route out of the three, but it may be worth considering if the other two routes are heavily congested during peak hours. The fuel costs based on current average gas prices from Canton to Barnstable are as follows:

  • Total Distance: 70.8 mi
  • Fuel Cost: $7.78
  • Toll Cost: $3.50 (one-way)
  • Total Cost: $11.28

Route 3: Via I-93S and MA-3S

This route goes via I-93S and MA-3S, taking approximately 77.5 miles. This may be the best option to consider during heavy traffic, as it is less congested than the other two. However, it is the longest route out of the three. The fuel costs based on current average gas prices from Canton to Barnstable are as follows:

  • Total Distance: 77.5 mi
  • Fuel Cost: $8.52
  • Toll Cost: $4.65 (one-way)
  • Total Cost: $13.17

Based on the distance and cost analysis, the best route to take would be Route 1, via MA-3S and US-6E. Although it has a higher toll fee, it has the shortest distance and travel time. Moreover, taking the route via MA-3S and US-6E presents drivers with attractive seaside views, making it a scenic route to take.

Conclusion

Although the cost of traveling from Canton to Barnstable varies depending on the chosen route, the recommended route is the shortest and most scenic one: Route 1, via MA-3S and US-6E. The total trip cost will be about $11.82, including gas and tolls, and the estimated travel time is about 1 hour and 20 minutes without heavy traffic. This is a considerable factor when considering the trip's affordability and convenience. It is worth noting that gas prices are subject to change, and toll fees may increase seasonally, so travelers are advised to check for updates before embarking on the trip.