The Cost of a Trip from Canton to Hamilton: Navigating Gas Prices in 2021

Planning a trip from Canton, Massachusetts to Hamilton, Massachusetts offers several route options to choose from, all with varying distance and gas costs. When taking current gas prices into account, finding the most cost-effective route requires careful consideration. However, with a little bit of strategy and planning, you can enjoy a budget-friendly road trip without sacrificing quality. In this article, we will explore the different routes, their individual costs, and recommend the best way to reach Hamilton with a careful eye on gas prices.

Route 1: Route 128 South and I-95 South

The first possible route to consider when travelling from Canton to Hamilton is by taking Route 128 South and I-95 South, a direct route of about 40 miles. Depending on your vehicle’s gas efficiency, the cost of gas will vary but averaged at $4.00 per gallon; a vehicle that uses 20 miles per gallon will consume 2 gallons of gas, which will result in a total gas cost of $8.00 for the round trip.

Route 2: I-95 and US-1 South

The second route we can take is via I-95 and US-1 South. This route is relatively shorter, with a distance of around 38 miles. However, it is a toll route where you will likely pay $2.20 for the round trip. Assuming our vehicle uses 20 miles per gallon, two gallons of gas will be used, which will cost approximately $8.00, making the total cost of this route $10.20.

Route 3: I-95 South and MA-128 South

If we decide to take I-95 South and MA-128 South, we will cover a distance of approximately 43 miles. This route is more direct than Route 2 but is also a toll route, with a round-trip cost of about $1.30. The cost of gas will be around the same as Route 1, meaning an estimated $8.00 for the round trip, resulting in a total cost of $9.30.

Route 4: I-93 South and I-95 North

Another alternative is to take I-93 South and I-95 North. This route's distance is about 42 miles and, while it is toll-free, it is subject to heavy traffic, particularly during rush hour. The cost of gas is almost the same as the previous routes, at $8.00 for the round trip, making the total cost the same as Route 3, around $9.30.

Route 5: Canton and Bremen Street (MBTA)

Finally, we can opt to take public transit via the MBTA. This option is more cost-effective than travelling by car or taxi, and there is no need to worry about traffic or parking. However, the route requires a combination of various modes of transport, including the bus and train. From Canton to Hamilton, we will need to take the bus to Quincy Adams T Station, then the train to Hamilton-Wenham Station. The cost of the bus ride is $2.10, while the cost of the train ride is around $9.20. The total cost for the round trip is approximately $22.10. The travel time is quite longer, at almost 2 hours per trip, but if we consider gas prices and the wear and tear of our cars, it is a worthy option to explore.

Conclusion

While there are various route options available when travelling between Canton and Hamilton, the best option is considering gas costs and traffic conditions. Based on this analysis, the most efficient route is Route 1, as it is the most cost-effective and direct. However, travellers can also take Route 2 or Route 3, depending on the toll and traffic conditions. Route 4 might be avoided during rush hours due to heavy traffic, while the public transit option, Route 5, is best for those who want to save on gas and parking fees. We hope that this article can help travellers plan their trips more wisely and effectively, saving time and money by taking the most cost-efficient routes.