Driving Cost from Carpentersville, Illinois to Freeport, Illinois

A picture depicting a gas pump

The Cost of a Trip Between Carpentersville, Illinois and Freeport, Illinois

If you are planning a trip from Carpentersville, Illinois to Freeport, Illinois, you might be wondering how much it will cost. The answer depends on various factors such as the mode of transportation, gas prices, and the route you take. In this guide, we'll explore the different possible routes and highlight the cost and distance of each one. We'll also recommend the best route based on the current gas prices.

Different Possible Routes

There are different possible routes you can take to get from Carpentersville to Freeport. The most common routes include:

Route 1: Via US-20 West (~65 miles)

This is the shortest and most direct route. To take this route, you'll need to follow these directions:

  • Take IL-31 S to Huntley Rd in Dundee Township
  • Turn right onto Huntley Rd
  • Merge onto US-20 W
  • Follow US-20 W to FLI Rd->Frontage Rd in Freeport

This route covers approximately 65 miles and takes about an hour and twenty minutes under normal traffic conditions.

Route 2: Via IL-72 W (~77 miles)

If you prefer a more scenic route, you can take IL-72 W. Here is the directions:

  • Take IL-31 S to Huntley Rd in Dundee Township
  • Turn right onto Huntley Rd
  • Turn left onto IL-72 W
  • Continue on W South St
  • Merge onto I-90 W
  • Take exit 111B for IL-72 W
  • Follow IL-72 W to US-20 W in Buena Vista Township
  • Continue on US-20 W to Freeport

This route covers approximately 77 miles and takes about an hour and thirty minutes under normal traffic conditions.

Route 3: Via IL-47 S and IL-72 W (~87 miles)

This route takes you through the countryside. Here is the directions:

  • Take IL-31 S to Huntley Rd in Dundee Township
  • Turn right onto Huntley Rd
  • Turn left onto IL-47 S
  • Turn right onto IL-72 W
  • Follow IL-72 W to US-20 W in Buena Vista Township
  • Continue on US-20 W to Freeport

This route covers approximately 87 miles and takes about an hour and forty minutes under normal traffic conditions.

Cost of Each Route

Now that we know the different possible routes, let's take a look at the cost of each. The cost of the trip will depend mainly on the gas prices. Currently, the average gas price in Carpentersville, Illinois is $2.40/gallon, while in Freeport, Illinois, it is $2.60/gallon. Let's assume that your car's fuel efficiency is 25 miles per gallon.

Route 1

To cover 65 miles, you'll need 2.6 gallons of gas. Multiply this by the cost per gallon, and you'll get the total cost of the trip:

  • Total cost = 2.6 x $2.40 = $6.24

Route 2

To cover 77 miles, you'll need 3.08 gallons of gas. Multiply this by the cost per gallon, and you'll get the total cost of the trip:

  • Total cost = 3.08 x $2.40 = $7.39

Route 3

To cover 87 miles, you'll need 3.48 gallons of gas. Multiply this by the cost per gallon, and you'll get the total cost of the trip:

  • Total cost = 3.48 x $2.40 = $8.35

Based on the current gas prices, Route 1 is the cheapest, costing only $6.24. It is also the shortest and most direct. Therefore, we recommend taking this route.

Conclusion

In conclusion, the cost of the trip between Carpentersville, Illinois and Freeport, Illinois, will depend on the gas prices, your car's fuel efficiency, and the route you take. Currently, Route 1 is the cheapest, costing only $6.24. This route covers approximately 65 miles and takes about an hour and twenty minutes under normal traffic conditions. Happy travels!