Driving Cost from Cedar Park, Texas to Granite Shoals, Texas

A picture depicting a gas pump

The Cost of a Trip between Cedar Park, Texas and Granite Shoals, Texas

Are you planning a trip from Cedar Park to Granite Shoals and wondering how much it would cost? The total cost would largely depend on the mode of transportation, distance, and gas prices. In this article, we'll break down different possible routes, highlight the cost and distance of each one, and recommend the best route based on current gas prices.

Possible Routes

Route 1 – Via TX-183A Toll Road and US-183 N

This route takes you from Cedar Park to Granite Shoals via TX-183A Toll Road and US-183 N. The distance between the two cities is around 56 miles, and the journey takes approximately 1 hour and 10 minutes.

The total cost of the trip depends on the gas prices, but you should expect to pay around $6 to $8 in tolls for using the TX-183A Toll Road. If you're driving a car with an average fuel economy (around 25 miles per gallon), you'll need to fill up your tank with around 2 gallons of gas, which would cost around $5.50 based on the current gas prices. Thus, the total cost of the trip would be around $11.50 to $13.50 (including tolls and gas).

Route 2 – Via TX-360 Loop S

This route takes you from Cedar Park to Granite Shoals via TX-360 Loop S. The distance between the two cities is around 66 miles, and the journey takes approximately 1 hour and 20 minutes.

There are no tolls on this route, but you'll need to fill up your tank with around 3 gallons of gas, which would cost around $8 based on the current gas prices. Thus, the total cost of the trip would be around $8 (including gas).

Route 3 – Via US-183 S

This route takes you from Cedar Park to Granite Shoals via US-183 S. The distance between the two cities is around 63 miles, and the journey takes approximately 1 hour and 15 minutes.

There are no tolls on this route, but you'll need to fill up your tank with around 3 gallons of gas, which would cost around $8 based on the current gas prices. Thus, the total cost of the trip would be around $8 (including gas).

Based on the total cost and distance, we recommend Route 3 – Via US-183 S. This route is slightly shorter than Route 2 (Via TX-360 Loop S), but the total cost of the trip is the same for both routes.

Conclusion

In conclusion, the cost of a trip between Cedar Park and Granite Shoals largely depends on the mode of transportation, distance, and gas prices. If you're planning a trip, we recommend using Route 3 – Via US-183 S, which has the same total cost as Route 2 but is slightly shorter. With the current gas prices, you can expect to pay around $8 for the trip (including gas). Now that you know the cost of the trip, you can plan your budget accordingly and enjoy your journey. Safe travels!