Driving Cost from Channelview, Texas to Fulshear, Texas

A picture depicting a gas pump

The Cost of a Trip between Channelview and Fulshear

Are you planning a trip from Channelview, Texas to Fulshear, Texas? One of the first things you will consider is the cost of the trip, which includes expenses such as gas, tolls, and vehicle wear and tear. In this article, we will break down the different routes available and estimate the cost of each option based on current gas prices.

Route 1: I-10 West

The most straightforward route from Channelview to Fulshear is taking I-10 West. This route covers a total distance of approximately 95 miles and takes about 1 hour and 20 minutes without traffic.

To estimate the cost of this trip, we will assume a fuel economy of 24 miles per gallon (MPG) and a gas price of $2.50 per gallon. With these assumptions, the total fuel cost of this trip would be about $23.96 for a round trip.

In addition to fuel costs, there are also tolls to consider on this route. The Harris County Toll Road Authority (HCTRA) has several toll roads that are part of the I-10 West route. These include the Sam Houston Tollway, Westpark Tollway, and the Katy Managed Lanes. The total cost of tolls for this route would be approximately $10.50 for a round trip.

Route 2: I-10 West to Grand Parkway South

Another option is to take I-10 West to Grand Parkway South (also known as State Highway 99) and then travel south to Fulshear. This route is slightly longer than the direct I-10 West route, covering a total distance of approximately 103 miles. However, it can be faster depending on traffic and may offer a more scenic drive. The estimated travel time for this route is about 1 hour and 40 minutes without traffic.

Using the same assumptions as before, the total fuel cost for this trip would be approximately $26.97 for a round trip. Additionally, there are two tolls along the Grand Parkway South portion of the route. The total cost of tolls for this route would be approximately $6 for a round trip.

Route 3: SH 225 West to SH 99 South

A third option is to take SH 225 West to SH 99 South and then head south to Fulshear. This route covers a total distance of approximately 78 miles and takes about 1 hour and 30 minutes without traffic.

Using the same assumptions as before, the total fuel cost for this trip would be approximately $18.72 for a round trip. There are no tolls on this route, making it a cheaper option overall.

Comparing the Routes

Given the options above, the cheapest route would be Route 3. However, the direct I-10 West route (Route 1) is the shortest and fastest option. Route 2 offers a scenic drive and may be faster than the direct route depending on traffic. The total cost of each option is summarized below:

  • Route 1: I-10 West
    • Distance: 95 miles
    • Time: 1 hour and 20 minutes (without traffic)
    • Fuel cost: $23.96
    • Toll cost: $10.50
    • Total cost: $34.46
  • Route 2: I-10 West to Grand Parkway South
    • Distance: 103 miles
    • Time: 1 hour and 40 minutes (without traffic)
    • Fuel cost: $26.97
    • Toll cost: $6
    • Total cost: $32.97
  • Route 3: SH 225 West to SH 99 South
    • Distance: 78 miles
    • Time: 1 hour and 30 minutes (without traffic)
    • Fuel cost: $18.72
    • Toll cost: $0
    • Total cost: $18.72

Conclusion

In summary, the cost of a trip from Channelview to Fulshear varies depending on the route taken and the fuel and toll costs. The direct I-10 West route is the fastest and most direct option, but also the most expensive due to tolls. Route 2 offers a scenic drive and may be faster depending on traffic, while Route 3 is the cheapest option with no tolls. Ultimately, the best route for your trip will depend on your specific needs and priorities. Whatever route you choose, be prepared for the cost of gas and tolls, and enjoy the journey!