The Cost of Driving from Chevy Chase, Maryland to Clinton, Maryland Based on Current Gas Prices
When planning a road trip, it's important to consider not only the distance and time it takes to get to your destination, but also the cost of gas and tolls along the way. In this blog post, we'll take a look at the various routes you can take from Chevy Chase, Maryland to Clinton, Maryland, and break down the distance, time, and cost of each option based on current gas prices.
Route 1: I-495 S and I-95 S - The Scenic Way
One of the most popular routes from Chevy Chase to Clinton takes you through some beautiful scenic areas. The total distance for this route is 30.5 miles, and it usually takes around 50 minutes to complete the journey. Taking this route, you will need to pay a toll of $4. At the current gas price of $2.75 per gallon, and assuming an average fuel efficiency of 26 miles per gallon, the estimated cost of gas for this route is approximately $3.46.
Route 2: I-495 S and I-495 S - The Express Way
If saving time is a priority for you, taking the expressway might be the best option. This route's total distance is 26.9 miles, and it typically takes around 40 minutes to reach Clinton. Similarly to Route 1, you will need to pay a toll, which in this case is $5. With the same gas price and fuel efficiency assumptions as before, the estimated cost of gas for this route is around $3.37.
Route 3: Indian Springs Rd and MD-5 S - The Scenic Shortcut
For those looking to avoid tolls altogether and enjoy a more scenic drive, this alternative route might be just right for you. The total distance for this route is 29.3 miles, and it generally takes around 50 minutes to complete the journey. As we are not taking any toll roads, the toll cost for this route is $0. Based on the same gas price and fuel efficiency assumptions, the estimated cost of gas for this route is approximately $3.71.
Route 4: River Rd and MD-5 S - The Local Experience
If you're in the mood to explore some local areas and enjoy a different view, this route might be worth considering. The total distance for this route is 31.7 miles, and it usually takes around 55 minutes to reach Clinton. Once again, you won't encounter any toll roads along the way, so the toll cost is $0. With the same gas price and fuel efficiency assumptions, the estimated cost of gas for this route is approximately $4.00.
Conclusion
When planning your trip from Chevy Chase, Maryland to Clinton, Maryland, it's important to consider the distance, time, and cost associated with each route. The table below summarizes the information we covered:
| Route | Distance (miles) | Time (minutes) | Toll Cost ($) | Gas Cost ($) |
|---|---|---|---|---|
| Route 1 | 30.5 | 50 | $4 | $3.46 |
| Route 2 | 26.9 | 40 | $5 | $3.37 |
| Route 3 | 29.3 | 50 | $0 | $3.71 |
| Route 4 | 31.7 | 55 | $0 | $4.00 |
Keep in mind that gas prices and toll costs can vary, so it's always a good idea to double-check before hitting the road. Safe travels, and enjoy your journey from Chevy Chase to Clinton!