Driving Cost from City of Albany, New York to Brick Township, New Jersey

A picture depicting a gas pump

The Cost of Driving From Albany, NY to Brick Township, NJ

Have you ever wondered how much it would cost to drive from Albany, New York to Brick Township, New Jersey? Well, look no further! In this blog post, we will explore the different routes you can take, the distance of each route, the time it takes, and the cost of each route. So buckle up and let's hit the road!

Route 1: Through I-87 S and I-287 S

If you choose to take Route 1 from Albany to Brick Township, you will be traveling a total distance of approximately 200 miles. This route takes you through I-87 S and I-287 S, which means you can enjoy some scenic views along the way. The estimated driving time for this route is about 3.5 hours, depending on traffic conditions.

Now, let's talk about the cost of this route. With the current gas prices at around $3.00 per gallon, and assuming your vehicle gets an average of 25 miles per gallon, you will need approximately 8 gallons of gas for the trip. This amounts to a total cost of around $24.00 for gas.

In addition to the gas cost, there are also tolls to consider. Along this route, you will encounter tolls at various points, including the Tappan Zee Bridge. The total toll cost for this route is approximately $11.50. So, in total, the cost of driving from Albany to Brick Township via Route 1 would be around $35.50.

Route 2: Through I-90 E and I-295 S

Another option to consider is Route 2, which takes you through I-90 E and I-295 S. This route covers a slightly longer distance of approximately 225 miles, but it offers a different driving experience. The estimated driving time for this route is about 4 hours.

Let's break down the cost of this route. Using the same gas prices and mileage estimate as before, you will need around 9 gallons of gas for the trip, resulting in a gas cost of approximately $27.00.

As for tolls, you will encounter them along this route as well. The total toll cost for this route is approximately $12.50. Therefore, the total cost of driving from Albany to Brick Township via Route 2 would be around $39.50.

Route 3: Through I-787 S and Garden State Pkwy

For those looking for a different scenic route, Route 3 might be the right choice. This route takes you through I-787 S and the iconic Garden State Parkway. The total distance covered by this route is approximately 235 miles, and the estimated driving time is around 4.5 hours.

Now let's dive into the cost of this route. With the same gas prices and mileage estimate as before, you will need around 9.5 gallons of gas, resulting in a gas cost of approximately $28.50.

As for tolls, there are toll booths along the Garden State Parkway. The total toll cost for this route is approximately $10.00. Therefore, the total cost of driving from Albany to Brick Township via Route 3 would be around $38.50.

Conclusion

In conclusion, the cost of driving from Albany, NY to Brick Township, NJ can vary depending on the route you choose to take. Here's a quick summary of the costs for each route:

  • Route 1: Approx. 200 miles, 3.5 hours, $35.50
  • Route 2: Approx. 225 miles, 4 hours, $39.50
  • Route 3: Approx. 235 miles, 4.5 hours, $38.50

Keep in mind that these costs are approximate and may vary based on fluctuations in gas prices and toll rates. It's always a good idea to check for the most up-to-date information before hitting the road.

Safe travels!