The Cost of a Trip: Collingswood, New Jersey to Lancaster, Pennsylvania

When planning a trip from Collingswood, New Jersey to Lancaster, Pennsylvania, one of the most important factors to consider is the cost of the journey. With fluctuating gas prices and various potential routes to take, it can be challenging to pinpoint the exact cost of the trip. In this article, we will explore the different possible routes between these two locations, highlighting the distance and cost associated with each one. Ultimately, we will recommend the best route based on current gas prices.

Route 1: Via I-95 N and PA-30 W

One of the most straightforward routes from Collingswood to Lancaster involves taking I-95 N and then transitioning onto PA-30 W. This route covers a distance of approximately 85 miles and takes around 1 hour and 30 minutes without traffic.

With current gas prices averaging around $2.50 per gallon, the cost of this journey can be estimated by considering the fuel efficiency of the vehicle being used. For example, if a car averages 25 miles per gallon, it would require approximately 3.4 gallons of gas for this trip. This would result in a total cost of around $8.50 one way.

Route 2: Via I-295 N and I-76 W

Another option for traveling from Collingswood to Lancaster involves taking I-295 N and then transitioning onto I-76 W before eventually connecting to US-322 W. This route covers a distance of approximately 95 miles and takes around 1 hour and 45 minutes without traffic.

Using the same average gas price and vehicle fuel efficiency, the estimated cost for this journey would be slightly higher than the first route, coming in at around $9.50 one way.

Route 3: Via US-322 W

For those looking for a scenic route, traveling via US-322 W is another viable option. This route covers a distance of approximately 100 miles and takes around 2 hours without traffic.

Due to the additional distance, the estimated cost for this journey would be around $10 one way, based on the same gas price and vehicle fuel efficiency.

Recommended Route

After considering the distance and estimated cost of each route, the recommended route for traveling from Collingswood, New Jersey to Lancaster, Pennsylvania is via I-95 N and PA-30 W. This route provides a good balance of distance and cost, making it the most efficient option for budget-conscious travelers.

Conclusion

In conclusion, the cost of a trip between Collingswood, New Jersey and Lancaster, Pennsylvania can vary depending on the route chosen and current gas prices. By evaluating the distance and estimated cost of each route, travelers can make an informed decision about the most affordable and efficient way to reach their destination. Ultimately, taking I-95 N and PA-30 W is the recommended route, offering a reasonable cost for a journey that takes approximately 1 hour and 30 minutes under normal driving conditions.