Driving Cost from Danville, Illinois to City of White Plains, New York

A picture depicting a gas pump

The Cost of Driving from Danville, Illinois to White Plains, New York: A Road Trip on a Budget

Embarking on a road trip is always an exciting experience, and driving from Danville, Illinois, to the City of White Plains, New York, is no exception. Along the way, you'll encounter scenic views, quaint towns, and maybe even a few pit stops for some delicious snacks. However, before you hit the road, let's break down the costs associated with this journey, especially focusing on current gas prices and tolls.

Route 1: The Quickest Way via I-80 E

This first route is the quickest and most direct way to reach White Plains.

  • Distance: Approximately 1,050 miles
  • Time: Around 16 hours and 15 minutes of driving time
  • Cost: With current gas prices averaging $3.50 per gallon, and your car’s fuel efficiency at about 25 miles per gallon, you will need about 42 gallons of gas. This brings your total gas expense to approximately $147.

Additionally, don't forget about tolls. The I-80 and I-95 routes combine for about $60 in tolls. Thus, your total estimated cost for this route comes to $207.

Route 2: A Scenic Drive via I-70 E and I-76 E

If you prefer a more scenic drive, you might want to take this alternative route.

  • Distance: Roughly 1,080 miles
  • Time: Expect about 17 hours of driving time
  • Cost: Utilizing the same gas price of $3.50 per gallon and fuel efficiency of 25 miles per gallon, you would need about 43.2 gallons, costing you approximately $151 in gas.

When it comes to tolls, this route will cost you about $40. Adding it all up, you’d spend around $191 on this route.

Route 3: The Budget-Friendly Option via I-64 E

If cost is your primary concern, consider this budget-friendly option.

  • Distance: Around 1,200 miles
  • Time: This route takes around 19 hours of driving time
  • Cost: Again, using gas prices of $3.50 per gallon and a fuel efficiency of 25 mpg, you will need about 48 gallons of gas. This results in a gas cost of about $168.

Tolls are minimal on this route, costing you roughly $20. Consequently, your total estimated cost for this route would be around $188.

Conclusion

Whatever route you choose for your adventure from Danville to White Plains, each option has its unique benefits and costs. With estimated totals ranging from $188 to $207, it’s crucial to assess your priorities—be it speed, scenery, or budget. So, pack your bags, fill your tank, and get ready for a delightful journey filled with memories and experiences! Safe travels!